Lighting controls

Bluetooth modules

CBU – ASD

CBU-ASD is controlled wirelessly with Casambi smartphone and tablet applications using Bluetooth 4.0 protocol. Devices form automatically a secure wireless mesh network so that a large number of fixtures can be controlled from any point. No external gateway module is needed. CBU-ASD can be controlled also from a standard on/o wall switches.

Input
220-240 VAC 50 Hz 0,6 A

Mains Output
220-240 VAC 50 HZ
SSR on phase line

0-10 V Output
0-10 VDC
7mA

Dimensions
56,5 x 35,8 x 22,3 mm

Protection
IP20
Built-in Class II

CBU – TED

CBU-TED can be controlled with Casambi app, available for iOS and Android devices, as well as with traditional wall switches. The Casambi app can be downloaded free of charge from Apple App Store and Google Play Store.

Different Casambi enabled products can be used as a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network.

Dimming method
Trailing-edge phase control

Input
85-240 VAC 50-60 HZ
and
120 VAC 60 Hz

Output
Incandescent and high voltage halogen bulbs:
150 VA @ 230 VAC
75 VA @ 120 VAC

High voltage AC LED modules:
150 VA @ 230 VAC
75 VA @ 120 VAC

Dimmable LED and CFL bulbs:
150 VA @ 230 VAC
75 VA @ 120 VAC

Dimmable electronic transformers:
150 VA @ 230 VAC
75 VA @ 120 VAC

Max. output current:
0,65 A

Min. load requirement
1W

Max. inrush current
10 A, 100 ms

Dimensions
40,4 x 36,3 x 14,0 mm

Protection
IP20

CBU – A2D

CBU-A2D is a Bluetooth controllable, Casambi enabled 2 channel 0-10V/DALI controller. CBU-A2D has a universal 100-277 VAC input voltage range.

CBU-A2D

CBU-A2D can control one or two 0-10V controllable LED drivers, or it can control a tunable white LED driver with two 0-10V control interfaces. The product can also be configured into a DALI mode where it can be connected to a DALI LED driver or DALI sensor for the presence and/or daylight harvesting functions.

Voltage Range
100-240 VAC (CE/UL/CSA)
277 VAC (UL/CSA only)

Frequency
50-60 Hz

Max. mains current
35 mA

No-load standby power
< 0,5 W

Channel 1 output
Output voltage, 0-10V 0-10 VDC, max. 7 mA (sinking)
Output voltage, DALI 12 VDC, max. 20 mA (sourcing)
Maximum number of drivers: 1 driver + 1 sensor/push button

Channel 2 output
Output voltage, 0-10V: 0-10 VDC, max. 7 mA (sinking)
Output voltage, relay control: 12 VDC, max. 100 mA (sourcing)
Maximum number of drivers: 1

Dimensions
76,0 x 26,0 x 23,0 mm
3.0 x 1.0 x 0.9 inch

ProtectionIP20
Built-in Class II

Switches

Casambi Xpress

Xpress has also up/down buttons that can either control the colour temperature if the luminaire in question has a tunable white- option or the up/down ratio if the luminaire in question has vertical control options. For the colour temperature control a tap on the ‘up’ button will set the colour temperature to the luminaire’s warmest colour level as well as a tap on the ‘down’ button to the coldest colour level. By holding the buttons the colour temperature will change smoothly in steps of 25 Kelvin. For the vertical control the ‘up’ button will dim the indirect lighting up and the direct lighting down, while the ‘down’ button will dim the direct lighting up and the indirect lighting down. The sum of the indirect and direct ratio is always 100%.

Xpress comes with a wall mounting plate. The switch can be attached to the plate as it is equipped with magnets.

Size
90 x 90 x 12 mm

Battery
CR 2430 Lithium-ion

Battery life
2-5 years, depending on usage

Mounting
A mounting bracket for wall mounting included

Range
up to 50 m in open air

Casambi capacitive switch / glass surface

The switch differs from the usual offers on the smart home market at first glance. The shiny glass surface is not interrupted by anything, no indentations, buttons or fastening screws. The extremely flat structure and the reduced design give the switch an unmistakable character. The printing of the surface can be customized according to needs.

Size
90 x 90 x 12 mm

Battery
CR 2430 Lithium-ion

Battery life
2-5 years, depending on usage

Mounting
A mounting bracket for wall mounting included

Range
up to 50 m in open air

EnOcean Easyfit Wall Twin Switch

Easyfit Wall Switch allows a battery less switching of Casambi controlled luminaires. 

Size
90 x 90 x 12 mm

Battery
CR 2430 Lithium-ion

Battery life
2-5 years, depending on usage

Mounting
A mounting bracket for wall mounting included

Range
up to 50 m in open air

Sensors

Daylight & Movement Sensor D85 PIR

Daylight and movement sensor for recessed  and surface mounted (accessory needed) areas. The sensor is wirelesslycontrollable with an Android / iOS smart device and forms automatically a wireless communication network with up to 250 nodes. Included shutters allow an adjustment of the detection area.

Size
90 x 90 x 75 mm

Mounting
A mounting bracket for ceiling mounting included

Range
up to 50 m in open air

Light measurement on sensor level
1 – 2000 lx

Detection range
Radius 8m on 3m installation height (max. 4m height)

DALI 2 Daylight & Movement Sensor M3 PIR 

Compact DALI 2 daylight and movement sensor. The sensor needs an additional DALI power supply and can be connected directly to the DALI line. Includes a shutter for preventing movement detection in one direction.

Size
45 x 17 x 19mm

Electric parameters
Supply voltage: 9.5 – 22.5V

Supply current: 8mA

Mounting
For integration use or with suitable accessories for ceiling and ceiling surfaced installation

Angle for PIR detection
84°

Angle for light measurement
30 – 60°

Light measurement range
0,5 – 2000 lx

Detection range
Radius 3,1m on 4m installation height (max. 5m height)

Controllers

MOAC-E-CSB-1

Single output Casambi enabled controller for blinds/curtains with AC motor. 120-277VAC, 10A max.

SWAC-E-CSB-10A

Single output Casambi enabled switched output, 120-277VAC, 10A max.

Your Content Goes Here

TRANS-E-CSB-1

Bluetooth enabled translator converts BLE signal to 0-10V dimming output with 2A switched live output

Your Content Goes Here